Hydraulic chain mulcher HCM-1700 for cutting bushes, branches and grass along fields and roads. Reach up to 6 m from the centre of the tractor and cutting height up to approx. 6.5 m.
The HCM-1700 hydraulic chain mulcher is designed for cutting bushes, branches and grass growing along the edges of fields and roads. With up to 6 m of reach from the centre of the tractor, it mows both the inner and outer ditch and trims trees and bushes up to approx. 6.5 m high. The shape of the booms allows mowing over barriers and fences.
The mulcher is mounted on the tractor's rear three-point hitch, so the cutting head cannot be moved against the cab or the wheels. Adjustable diagonal tie rods add stability to the hitch. Mulching is powered by the mulcher's own PTO-driven hydraulic system, independent of the tractor's hydraulics. The anti-cavitation valve protects the hydraulic motor when the PTO is switched off and the rotor is still spinning. The hydraulic hatch opens the front of the cutting head, so the chain cuts the trunk before the head pushes the tree.
The mulcher is quick to put into operation: just connect the PTO shaft, the quick-coupled hoses and the power supply. For transport and storage, the main cylinders are locked with hand-operated valves. When unhitched, adjustable support legs keep the mulcher upright, and forklift pockets make lifting and loading easy. Wear parts are easy to replace and spare parts are quickly available.
-
The SAMI hydraulic chain mulcher is made from high-quality SSAB steel, which ensures excellent durability and a long service life.
A large reach of up to 6 m from the centre of the tractor allows mowing both the inner and outer ditch along the roadside, and trimming the branches of trees and bushes along field edges up to approx. 6.5 m high.
The articulated boom arches over roadside barriers, fences and posts, so the head can cut the vegetation on the far side.
The free-pivoting head trails behind the boom and follows uneven ground. Hydraulic lateral tilt (167°) adjusts it sideways for slopes and ditches.
The working surfaces of the double-walled mulcher head and the replaceable support skids are made of wear-resistant Hardox® 500 Tuf steel.
Small toolbox for spare chains. Large 150 L toolbox for the PTO shaft, diagonal tie rods and tools.
Integrated oil cooler with a bypass valve for pressure protection and a thermostat-controlled fan with an automatic reverse-rotation cleaning program.
170 L oil tank with return filter for cool, clean hydraulic oil.
Hydraulic accumulators on the cylinders absorb shocks and soften boom movements, protecting both the machine and the tractor.
The chain rotor runs on its own PTO-driven Sunfab hydraulic circuit with a pressure relief valve, so cutting power does not depend on the tractor's hydraulic capacity. All positioning movements use the tractor's hydraulics and controls.
Springs absorb the impact when the cutting head hits an obstacle, allowing time to stop or lift it hydraulically.
The digital display shows the hydraulic oil temperature before and after the cooling unit, making the cooler's performance easy to monitor. A green light shows when the cooling fan is running.
Spare chain links are stored inside the rotating chain housing. Removing one bolt gives access for quick, easy chain adjustment.
Enter your location in the search bar and the nearest dealer point will be displayed with the details you need. If you would like to get directions, select “get directions”.