Hydraulic chain mulcher HCM-1700

Hydraulic chain mulcher HCM-1700 for cutting bushes, branches and grass along fields and roads. Reach up to 6 m from the centre of the tractor and cutting height up to approx. 6.5 m.

Gallery

SAMI hydraulic chain mulcher HCM-1700 mowing a roadside ditch with a John Deere tractor
Chain mulcher HCM-1700 in transport position behind the tractor
Chain mulcher HCM-1700 cutting brush at a field edge
Chain mulcher HCM-1700 cutting head cutting brush
Chain mulcher HCM-1700 trimming the branches of roadside trees
Chain mulcher HCM-1700 with booms raised to maximum cutting height
Chain mulcher HCM-1700 mowing the roadside and ditch at full reach
Chain mulcher HCM-1700 mowing roadside grass, rear view
Chain mulcher HCM-1700 mowing the roadside verge behind the tractor
Chain mulcher HCM-1700 oil tank and hydraulic hoses
Chain mulcher HCM-1700 hydraulic accumulators
Chain mulcher HCM-1700 counterweights

Hydraulic chain mulcher HCM-1700

Hydraulic chain mulcher HCM-1700 drawing

Features

Chain mulcher HCM-1700 reach up to 6 m and cutting height up to 6.5 m

Reach

A large reach of up to 6 m from the centre of the tractor allows mowing both the inner and outer ditch along the roadside, and trimming the branches of trees and bushes along field edges up to approx. 6.5 m high.

Chain mulcher HCM-1700 boom reaching over a barrier

Over barriers

The articulated boom arches over roadside barriers, fences and posts, so the head can cut the vegetation on the far side.

Chain mulcher HCM-1700 floating articulated cutting head

Floating cutting head

The free-pivoting head trails behind the boom and follows uneven ground. Hydraulic lateral tilt (167°) adjusts it sideways for slopes and ditches.

Chain mulcher HCM-1700 Hardox® 500 Tuf working surfaces and support skids

Hardox® 500 Tuf

The working surfaces of the double-walled mulcher head and the replaceable support skids are made of wear-resistant Hardox® 500 Tuf steel.

Chain mulcher HCM-1700 two toolboxes

Two toolboxes

Small toolbox for spare chains. Large 150 L toolbox for the PTO shaft, diagonal tie rods and tools.

Chain mulcher HCM-1700 cooling unit

Cooling unit

Integrated oil cooler with a bypass valve for pressure protection and a thermostat-controlled fan with an automatic reverse-rotation cleaning program.

Chain mulcher HCM-1700 170 L oil tank

Oil tank

170 L oil tank with return filter for cool, clean hydraulic oil.

Chain mulcher HCM-1700 hydraulic accumulators on the boom cylinders

Hydraulic accumulators

Hydraulic accumulators on the cylinders absorb shocks and soften boom movements, protecting both the machine and the tractor.

Chain mulcher HCM-1700 PTO shaft and PTO-driven hydraulic circuit

PTO-driven mulching circuit

The chain rotor runs on its own PTO-driven Sunfab hydraulic circuit with a pressure relief valve, so cutting power does not depend on the tractor's hydraulic capacity. All positioning movements use the tractor's hydraulics and controls.

Chain mulcher HCM-1700 spring collision protection

Spring collision protection

Springs absorb the impact when the cutting head hits an obstacle, allowing time to stop or lift it hydraulically.

Chain mulcher HCM-1700 digital hydraulic oil temperature display

Digital display

The digital display shows the hydraulic oil temperature before and after the cooling unit, making the cooler's performance easy to monitor. A green light shows when the cooling fan is running.

Chain mulcher HCM-1700 one-bolt chain housing

One-bolt chain housing

Spare chain links are stored inside the rotating chain housing. Removing one bolt gives access for quick, easy chain adjustment.

Product code
440.000
Working width (mm)
1700
Transport dimensions L x W x H (m)
2.2 x 2.6 x 2.9
Reach from the centre of the tractor (min.-max.) (mm)
450 - 6000
Max. cutting height (depending on the tractor size) (m)
approx. 6.5
Weight (kg)
approx. 2000 (including 300 kg of counterweights)
Head movement
Hydraulic lateral tilt (167°) + mechanical travel-direction tilt for uneven terrain tracking
PTO (rpm)
Up to 1000
Chain (mm)
13
Oil pressure (max.) (bar)
200
1/2” couplings
4 pairs
Rec. tractor weight (t)
From 6
Rec. tractor power (hp)
From 120
Standard equipment
Impact protection – spring relief system and hydraulic accumulators
PTO shaft
Diagonal supports for the 3P hitch
Floating cutting head + hydraulic tilt
Hardox® 500 Tuf mulcher head
Bolt-on support skids
Small toolbox for spare chains
Large toolbox for the PTO shaft, diagonal supports and tools
300 kg of counterweights

Hydraulic system for linear movements:
Quick couplings for connecting to the tractor's hydraulics
Manual ball valves for locking the hydraulic cylinders
Hydraulic accumulators on the boom cylinders

Hydraulic system for mulching:
Hydraulic pump + pressure relief valve
Hydraulic motor with anti-cavitation valve
Oil cooler with bypass valve + thermostat with reverse-rotation program
170 L oil tank + return filter
Digital display for hydraulic oil temperature
3P hitch
Cat. 2 (and 3)
Material
Made from SSAB steel
Additional equipment
Product code
Description
439.015
10 mm chains
439.710
HD Hardox support skids (15 mm)
440.799
Additional counterweight (23 kg)
497.700
Cutting blade set with blade holder
439.704
Side skid

Resources

Hydraulic chain mulcher HCM-1700

Please fill in all required fieldsPlease fill in all required fields
Incorrect e-mail address

Find your dealer